Showing Results for
- Academic Journals (522)
Search Results
- 522
Academic Journals
- 522
-
From:Polymer Engineering and Science (Vol. 40, Issue 2) Peer-ReviewedJIN-HAE CHANG [*] Blends of two precursor polymers. polyhydroxy amide (PHA) and poly(amic acid) (PAA), were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The presence of...
-
From:PLoS ONE (Vol. 7, Issue 5) Peer-ReviewedAuthor(s): Jan Bert Van Klinken 1 , * , Sjoerd A. A. van den Berg 1 , Louis M. Havekes 2 , 3 , 4 , Ko Willems Van Dijk 1 , 2 Introduction In the last few decades a great deal of effort has been devoted to...
-
From:PLoS ONE (Vol. 8, Issue 8) Peer-ReviewedAuthor(s): Pierre Bruyère 1,*, Anne Baudot 2, Thierry Joly 1,3, Loris Commin 1, Elodie Pillet 1, Pierre Guérin 1, Gérard Louis 2, Anne Josson-Schramme 1, Samuel Buff 1 Introduction Embryo transport and transfer in...
-
From:Journal of NanomaterialsPeer-ReviewedSericin from Bombyx mori cocoon has good hydrophilicity, reaction activity, biocompatibility, and biodegradability, which has shown great potentials for biomedical materials. Here, an ultraviolet light-assisted in situ...
-
From:Construction and Building Materials (Vol. 157) Peer-ReviewedABSTRACT Effects of sodium gluconate on early hydration of the Portland cement-calcium aluminate cementanhydrite (PC-CAC-C[bar.S]) ternary binder were investigated through isothermal calorimetric, X-ray diffraction...
-
From:Polymer Engineering and Science (Vol. 58, Issue 1) Peer-ReviewedThe direct long-fiber reinforced thermoplastic (D-LFT) process offers a streamlined material processing technique and decreases the degradation of the material. To ensure product consistency and process optimization, it...
-
From:Polymer Engineering and Science (Vol. 46, Issue 3) Peer-ReviewedThe different steps associated with the curing of a PVAc/polyester blend are identified and correlated to the mechanism of shrinkage control in the presence of a low-profile additive (LPA). Poly(vinyl acetate) (PVAc) is...
-
From:Applied Physiology, Nutrition, and Metabolism (Vol. 43, Issue 4) Peer-ReviewedWe assessed the effect of metaboreceptor activation on whole-body evaporative heat loss (WB-EHL) in 12 men (aged 24 [+ or -] 4 years) in the early-to-late stages of a 60-min exercise recovery in the heat. Metaboreceptor...
-
From:Construction and Building Materials (Vol. 173) Peer-ReviewedABSTRACT In this paper, the effect of a new starch-based chemical admixture (SA) on cement hydration is investigated and its preliminary action mechanism is discussed. The results from isothermal calorimeter and...
-
From:Advances in Materials Science and Engineering (Vol. 2017) Peer-ReviewedJute cellulose composite (JCC), bamboo cellulose composite (BCC), untreated hybrid jute-bamboo fiber composite (UJBC), and jute-bamboo cellulose hybrid biocomposite (JBCC) were fabricated. All cellulose hybrid...
-
From:Construction and Building Materials (Vol. 38) Peer-ReviewedABSTRACT The calorimetric method was used as a main tool in the studies of the effect of superplasticizing and set retarding admixtures on cement hydration. The experiments were carried out using two types of cements...
-
From:Polymer Engineering and Science (Vol. 48, Issue 7) Peer-ReviewedMacroindentation tests were performed by means of a flat cylindrical indenter on high-density polyethylene (HDPE) and polyamide 66 (PA66). Commercial sheets were acquired for both materials, and specimens were extracted...
-
From:Polymer Engineering and Science (Vol. 49, Issue 8) Peer-ReviewedThe distribution of carbon black (CB) in uncured blends of natural rubber (NR) and polybutadiene (PB) can be quantified using DSC. The crystallization temperature of PB containing CB, measured during cooling from the...
-
From:Construction and Building Materials (Vol. 69) Peer-ReviewedABSTRACT This paper describe the modification of bitumen with electron irradiated recycled low density polyethylene ([e-LDPE.sub.R]). Electron beam irradiation was applied to recycled LDPE ([LDPE.sub.R]) to provide...
-
From:Research in Pharmaceutical Sciences (Vol. 13, Issue 2) Peer-ReviewedByline: Ahmad. Ainurofiq, Rachmat. Mauludin, Diky. Mudhakir, Sundani. Soewandhi This study describes the formation of multicomponent crystal (MCC) of desloratadine (DES). The objective of this study was to discover...
-
From:Journal of Chemistry (Vol. 2018) Peer-ReviewedThe combustion energy of histidine enantiomers (L and D) and of their racemic mixture was measured experimentally. The following values for the enthalpies of formation corresponding to the crystalline state were derived...
-
From:Construction and Building Materials (Vol. 48) Peer-ReviewedABSTRACT Effects of aluminium trihydroxide (ATH), expanded vermiculite (EVMT), organic expanded vermiculite (OEVMT) and their mixtures (ATH/EVMT and ATH/OEVMT) on flame retardancy of bitumen were investigated. The...
-
From:AI Magazine (Vol. 33, Issue 2) Peer-ReviewedIn this article we provide insight into the BodyMedia FIT armband system--a wearable multisensor technology that continuously monitors physiological events related to energy expenditure for weight management using...
-
From:Construction and Building Materials (Vol. 36) Peer-ReviewedABSTRACT Tensile tests were conducted in order to evaluate the cyclic behaviour of superelastic Ni-Ti wires for civil engineering applications, Different load--unload cycling frequencies, maximum elongation and...
-
From:Construction and Building Materials (Vol. 28, Issue 1) Peer-ReviewedABSTRACT A new DSC-based experimental method to efficiently establish the glass transition temperature, [T.sub.g], vs. curing degree, [alpha], relationship for structural adhesives was developed. The method...