Showing Results for
- Academic Journals (31)
Search Results
- 31
Academic Journals
- 31
-
From:Advances in Mechanical EngineeringPeer-ReviewedLiquid-solid forming under high pressure involves the solidification coupled with deformation under high pressure, which will improve the properties of materials or products without requiring very high forming load....
-
From:Mechanika (Vol. 22, Issue 3) Peer-ReviewedSignificant reductions in manufacturing costs are required to make structural material attractive for mass production applications such as automotive components. This can be achieved through highly efficient multi point...
-
From:Plastics Engineering (Vol. 60, Issue 9) Peer-ReviewedTen years ago the industry was sure that in-mold decorating with paint films for exterior applications was going to take hold, but it fell flat. Automakers cautiously began implementing the technology for applications...
-
From:Mechanika (Vol. 25, Issue 1) Peer-ReviewedThe study is performed to investigate the effects of low pressure tubular hydro-forming process parameters on the protrusion height and percentage change in wall thickness of 6063-O aluminium tubes. A mathematical...
-
From:Mathematical Problems in Engineering (Vol. 2017) Peer-ReviewedInherent strain method has been widely used as a forecasting and computing method for welding deformation of large complicated structures and further applied to the research of line heating forming. Mechanical forming...
-
From:Mathematical Problems in Engineering (Vol. 2017) Peer-ReviewedIn order to make the inner L-shape ring polling process with a closed die structure (ILRRCDS) on the top and bottom of the driven roll stable, at first, this paper established the mathematical model for ILRRCDS. Then,...
-
From:Plastics Engineering (Vol. 70, Issue 5) Peer-ReviewedU.S. Patent 8,647,794 (February 11, 2014), "Method of Forming Holograms in Polymer Composites with Confined Crystallization," Patrick Joseph McCloskey, Amitabh Bansal, and Warren William Reilly (General Electric...
-
From:Advanced Materials & Processes (Vol. 169, Issue 9) Peer-ReviewedThe company 3D-Metal Forming Ltd., Lelystad, the Netherlands, demonstrated it can produce intricate aircraft components like the cockpit fuselage using its explosive-forming technology during a research and development...
-
From:Mechanika (Vol. 20, Issue 4) Peer-ReviewedThe article presents results of analysis of applications of incremental forming technology for production of composite moulds. Results of the research of formability of sheet metal based on single point incremental...
-
From:Advanced Manufacturing Technology (Vol. 31, Issue 12) Peer-ReviewedLost-wax casting is one of the oldest known metal-forming techniques. Investment casting is an industrial process based on lost-wax. which uses high-technology waxes, refractory materials, and specialist alloys to make...
-
From:Construction and Building Materials (Vol. 25, Issue 5) Peer-ReviewedABSTRACT In order to determine the behavior of thick-wall cold-rolled steel sections with square and rectangular hollow cross-section, experiments concerning materials properties of the flat coupons, corner coupons,...
-
From:Advances in Natural and Applied Sciences (Vol. 6, Issue 2) Peer-ReviewedSpringback is one of a significant problem in the sheet metal forming. There are a number of effort taken in predicting and quantifying the springback experimentally. In this research, few design and process parameters...
-
From:Advanced Materials & Processes (Vol. 166, Issue 12) Peer-ReviewedA process in which compound curves are formed in titanium aerospace structures has reportedly been developed at GKN Aerospace, England. Called Delta Forming, the process starts with a titanium cylindrical honeycomb...
-
From:International Journal of Simulation Modelling (Vol. 9, Issue 1) Peer-ReviewedUtilizing commercial DEFORM[TM] 3D finite element (FE) software, this study performs a series of numerical simulations to investigate the superplastic blow-forming of Ti-6Al-4V titanium alloy into a closed...
-
From:Advanced Manufacturing Technology (Vol. 26, Issue 2) Peer-ReviewedWhile we mostly think of aluminum as a material for producing foamed metals, copper also can be used to produce highly porous cell structured products. Copper is used a great deal in industrial applications such as heat...
-
From:Advances in Mechanical EngineeringPeer-ReviewedA multicurved sheet metal surface for a skin structure has usually been manufactured using a conventional die forming process involving the use of both a die and a press machine in accordance with the product shape....
-
From:Advances in Mechanical EngineeringPeer-ReviewedA comparative and numerical study on the formability of a sheet formed into a V-shaped die using a conventional stamping operation and an electromagnetic forming (EMF) process was performed. To evaluate the damage...
-
From:Advanced Materials & Processes (Vol. 179, Issue 4) Peer-ReviewedBinder and Polymer Assisted Powder Processing focuses on the basic principles and options available for the application of polymers and natural organics to powder processing. It links the material, powder...
-
From:Advanced Materials & Processes (Vol. 179, Issue 7) Peer-ReviewedWhen QuesTek Innovations formed in 1997, inefficient, costly, and time-consuming trial and error methods for materials design were the industry norm. The company's engineers believed there was a better way--using the...
-
From:Advanced Materials & Processes (Vol. 179, Issue 8) Peer-ReviewedSteel is vital for the durable infrastructure development needed for growing populations. It provides affordable housing and mobility solutions and is indispensable for energy generation and distribution. Due to its...