Showing Results for
- Academic Journals (51)
Search Results
- 51
Academic Journals
- 51
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedDynamic resilient modulus is the design index of highway subgrade design code in China, which is significantly affected by the traffic loads and environmental changes. In this study, dynamic triaxial tests were conducted...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedTo reduce the amount of cement used in cemented coal gangue backfill (CCGB, a mixture of coal gangue, cement, fly ash, and water), mechanical and deformation properties of CCGB in which CSFA partially replaces the cement...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedWith the gradual depletion of shallow resources, the petroleum industry is developing toward ultradeep wells and high-speed drillings, and the problems of corrosion and erosion failure of drill pipe materials are...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedAs a class of high-ductility concrete, engineered cementitious composites (ECC) have wide application prospects in engineering fields. However, the occurrence of cracks and the limited self-healing ability hinder the...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedIn order to improve the structural safety and stability of the tunnels crossing stick-slip fault, an indoor model test on the effect of tunnel antibreaking measures under the influence of fault stick-slip movements was...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedThe nonhomogeneity of concrete leads to randomness in the development and extension of cracks. Scholars have proposed different models to analyze the development of cracks. Different from existing works on crack...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedMetakaolin (MK), which has a fine particle size and higher activity in high alkaline environments, has been widely used in the fields of soil treatment engineering to stabilize soils. MK is used to replace part of...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedIn the production process of continuous casting slab, the unreasonable secondary cooling system can lead to serious crack defects. This study focuses on the problem of cracks in nuclear power stainless steel produced by...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedTraditional contact lenses bring convenience for ophthalmic drug delivery. However, either as contact lenses or as drug carriers, traditional materials have still some drawbacks in the field. Therefore, a transparent...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedNowadays, modern embedded applications are becoming more and more complex and resource demanding. Fortunately, Systems on Chip (SoC) are one of the keys used to follow their requirements that stand in need of high...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedPeridynamic (PD) theory is used to study the thermally induced cracking behavior of functionally graded materials (FGMs). A modified thermomechanical peridynamic model is developed. The thermal crack propagation of a...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedThe purpose of this paper is to report on the drainage of porous asphalt pavement evaluation method suited for use in analyzing clogging effect. To preliminarily reveal the decrease in permeability caused by clogging of...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedIf an airtight wall in a coal mine leaks air, it may cause spontaneous combustion of residual coal in the gob and even cause a full-blown fire or gas explosion. In this study, we developed a new type of foamed concrete,...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedIn order to research the effect of heat treatment on the microstructure and corrosion resistance of stainless/carbon steel bimetal plate, the annealing process at 700[degrees]C with different times was carried out for...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedThis paper concerns the inductive experimental study of corrosion products of the medium carbon steel CK45DIN using magnetized water as hardening media, where the water has been exposed to a magnetic field of 1000 Gauss...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedBamboo is highly renewable and biodegradable with good short-term strength, which meets the requirement for temporal support structures in shallow foundation pits. Based on this, we conducted a laboratory model test on...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedThe selective laser melting technique is widely used in aerospace and biomedical industries, and the performance of formed 316L parts is significantly subject to the forming angle. As the selective laser melting 316L...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedThis study investigated the ballistic resistance of a composite target plate fabricated by combining SiC ceramic with the Dyneema fiber. To achieve a light-weight target plate that conforms to the US National Institute...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedAs two-dimensional materials with a high specific surface area, strength, and electrical and thermal conductivity, graphene (Gr) and its derivatives have great application prospects in various fields such as structural...
-
From:Advances in Materials Science and Engineering (Vol. 2019) Peer-ReviewedIn this study, not only the effects of cryogenic processing on the wear of AISI M2 punches but also the effects of punch wear on the hole edge geometry of DIN EN 10111-98 sheet metal control arm parts were investigated....