Search Results

• • 53 

    Academic Journals

  • Sort by: sorttype.publication.date.desc Newest sorttype.publication.date.asc Oldest sorttype.relevance Relevance

• Zigzag Dissociation Mode of Dislocations on the {10[bar.1]1} Plane in Magnesium Alloys.

  Authors:Hao Sun, Zhigang Ding, Shuang Li, Xinping Zhang, Enrique J. Lavernia, and Wei LiuFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20202,697 words Article 1470LFundamental understanding of the dissociation mode of dislocations on the {10[bar.1]1} plane is required before the goal of improving the ductility of Mg alloys attained. In this study, our density-functional...

• Three-Dimensional Generalized Dynamics of Soft-Matter Quasicrystals.

  Authors:Tian-You Fan and Zhi-Yi TangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20203,393 words Article 1450LThe three-dimensional generalized dynamics of soft-matter quasicrystals was investigated, in which the governing equations of the dynamics are derived for observed 12-fold symmetry quasicrystals and possibly observed 8-...

• Microbial-Induced Carbonate Precipitation for Strengthening Soft Clay.

  Authors:J.Z. Xiao, Y.Q. Wei, H. Cai, Z.W. Wang, T. Yang, Q.H. Wang, et al.From:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20206,052 words Article 1510LCurrently, calcite produced in sediments by microbial-induced carbonate precipitation (MICP) is mainly used as a strengthening binder in sand because sands are porous and have good permeability. Conventional wisdom does...

• PC Cable-Stayed Bridge Main Girder Shear Lag Effects: Assessment of Single Cable Plane in Construction Stage.

  Authors:Yan-feng Li, Xing-long Sun, and Long-sheng BaoFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20209,282 words Article 1500LA model test and finite element analysis were conducted in this study to determine the distribution law of shear lag effect in the main beam section, a box girder, during the cable-stayed bridge construction process. The...

• Shear Resistance of Rock Joint under Nonuniform Normal Stress.

  Authors:Hang Lin, Hu Wang, Yifan Chen, Rihong Cao, Yixian Wang, Rui Yong, et al.From:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,088 words Article 1520LMany factors influence the shear resistance of rock joints. Among them, the above overburden load is the most important factor. The uneven thickness of the overburden causes the joints to be subjected to the nonuniform...

• Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course.

  Authors:Wilson Unger Filho, Luis Miguel Gutierrez Klinsky, Rosangela Motta, and Liedi Legi Bariani BernucciFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20206,025 words Article 1460LThe rehabilitation process of asphalt pavements using the technique of milling and filling can cause several environmental problems due to either the disposal of the milled asphalt mix or the exploration of natural...

• High-Temperature Tensile Fractography of Zr-, Ni-, and Mn-Containing Al-Si-Cu-Mg Cast Alloys.

  Authors:M.H. Abdelaziz, E.M. Elgallad, A.M. Samuel, H.W. Doty, and F.H. SamuelFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20204,535 words Article 1570LThis study investigated the fracture behavior of 0.3% Zr-containing 354 alloy following the addition of 0.75% Mn or 2%Ni. The examined surfaces were obtained from tensile testing of the bars at 250[degrees]C. For each...

• Experimental Observation on the Pure Torsional Ratchetting of Polycarbonate Polymer at Room Temperature.

  Authors:Fucong Lu, Bencheng Zhang, Bo Wu, Zhiwen Wu, and Xiao SuoFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20204,985 words Article 1630LThe stress-controlled pure torsional cyclic tests are carried out to investigate the torsional ratchetting of polycarbonate (PC) polymer at room temperature. The effects of applied shear mean stress, stress amplitude,...

• Behavior of Lime-Stabilized Red Bed Soil after Cyclic Wetting-Drying in Triaxial Tests and SEM Analysis.

  Authors:Zhengmin Song, Dewen Zhang, Yuncheng Mao, Yanhu Mu, Kun Zhang, and Qinglong ZhangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20204,718 words Article 1370LMost red beds demonstrate inferior geotechnical properties in natural conditions and need to be improved when used as construction material. In this study, a serious of triaxial tests, permeability tests, and scanning...

• Analysis of Line Contact Elastohydrodynamic Lubrication with the Particles under Rough Contact Surface.

  Authors:Keying Chen, Liangcai Zeng, Juan Chen, and Xianzhong DingFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,758 words Article 1490LA numerical solution for line contact elastohydrodynamic lubrication (EHL) occurring on the rough surface of heterogeneous materials with a group of particles is presented in this study. The film thickness disturbance...

• Fundamental Investigation on Seismic Retrofitting Method of Aging Concrete Structural Wall Using Carbon Fiber Sheet-Constitutive Law of Rectangular Section.

  Authors:Kazuhiro Hayashi, Tomoya Matsui, Taiki Saito, and Roy ReynaFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20206,469 words Article 1580LAging building structure has become a world problem. This problem is particularly serious in developing and underdeveloped countries. The multihazard resilience and sustainability (e.g., seismic performance) decrease at...

• Erratum to "Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures".

  From:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 2020161 words Correction notice, B... 1250LIn the article titled "Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures" [1], author Ke Wu was omitted from the list of corresponding authors. The publisher apologises for...

• Foam Concrete: A State-of-the-Art and State-of-the-Practice Review.

  Authors:Yanbin Fu, Xiuling Wang, Lixin Wang, and Yunpeng LiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 202018,937 words Article 1450LFoam concrete (FC) has the potential of being an alternative to ordinary concrete, as it reduces dead loads on the structure and foundation, contributes to energy conservation, and lowers the cost of production and labor...

• Pickling Behaviour of 2205 Duplex Stainless Steel Hot-Rolled Strips in Sulfuric Acid Electrolytes.

  Authors:Jianguo Peng and Moucheng LiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20204,661 words Article 1450LPickling behaviour of the oxide layer on hot-rolled 2205 duplex stainless steel (DSS) was studied in [H.sub.2]S[O.sub.4] solutions with electrolytic workstation. The pickling rate at 75[degrees]C increases slightly with...

• Experimental Study of High-Strength Steel Fiber Lightweight Aggregate Concrete on Mechanical Properties and Toughness Index.

  Authors:Yanxia Ye, Jilei Liu, Zhiyin Zhang, Zongbin Wang, and Qiongwu PengFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,145 words Report 1430LIn this paper, three different kinds of steel fibers, being micro (M), end-hooked (H), and corrugated (C), commonly used in engineering applications, are added to high-strength lightweight aggregate concrete (HLAC) to...

• Effect of Nano-CaC[O.sub.3] on the Mechanical Properties and Durability of Concrete Incorporating Fly Ash.

  Authors:Yanqun Sun, Peng Zhang, Weina Guo, Jiuwen Bao, and Chengping QuFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,574 words Article 1430LConcrete mixtures consisting of nanomaterials and fly ash have been shown to be effective for improving the performance of concrete. This study investigates the combined effects of nano-CaC[O.sub.3] and fly ash on the...

• Study on the Heat of Hydration and Strength Development of Cast-In-Situ Foamed Concrete.

  Authors:Wenhui Zhao, Qian Su, Feng Han, and Wubin WangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,567 words Report 1630LThis study aims to investigate the relationship between the heat of hydration and the strength development of cast-in-situ foamed concrete. First, indoor model tests are conducted to determine the effects of the casting...

• Fatigue Reliability Analysis of Motor Hanger for High-Speed Train Based on Bayesian Updating and Subset Simulation.

  Authors:Yonghua Li, Pengpeng Zhi, Yue Zhang, Bingzhi Chen, and Yuedong WangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,355 words Article 1430LIn order to more accurately analyze the fatigue reliability of motor hanger for high-speed train and reduce the influence of uncertain factors, a Bayesian statistical method is introduced to propose a novel fatigue...

• Thermal Conductivity Characteristics of Thermal Insulation Materials Immersed in Water for Cold-Region Tunnels.

  Authors:Youyun Li, Yongmei Sun, Yuan Zhuang, LiMin Duan, and Ke XieFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20207,539 words Article 1430LThis study investigates the distribution of pore water on the basis of the measured mass moisture content after soaking the tunnel insulation material. This study also analyzes the influence of the distribution of pore...

• Interaction of Cyclic Loading (Low-Cyclic Fatigue) with Stress Corrosion Cracking (SCC) Growth Rate.

  Authors:Rehmat Bashir, He Xue, Rui Guo, Yueqi Bi, and Muhammad UsmanFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Apr. 30, 20205,109 words Article 1460LThe structural integrity analysis of nuclear power plants (NPPs) is an essential procedure since the age of NPPs is increasing constantly while the number of new NPPs is still limited. Low-cyclic fatigue (LCF) and stress...