Search Results

• • 50 

    Academic Journals

  • Sort by: sorttype.publication.date.desc Newest sorttype.publication.date.asc Oldest sorttype.relevance Relevance

• Wear Properties of TiC-Reinforced Co50 Composite Coatings from Room Temperature to High Temperature.

  Authors:Nga Thi-Hong Pham and Van-Thuc NguyenFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 202012,465 words Article 1350LIn this paper, the laser cladding is created by using Co50 powder and TiC mixture, covering a H13 hot-working steel substrate. The samples are analyzed by the hardness test, XRD, SEM, and friction test to identify the...

• Out-of-Plane Shaking Table Tests on Seismic Response of RC Frame Infilled with a New Type of Shale Fired Heat-Insulation Blocks.

  Authors:Jian Wu, Li-dan Zhang, Qing Yu, and Bo WangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20204,293 words Article 1580LShale fired heat-insulation block, which is made of shale, fly ash, building rubbish, and waste paper, is a new type environment-friendly product. In order to study the mechanical properties of shale fired...

• Multiscale Study on the Modification Mechanism of Red Mud Modified Asphalt.

  Authors:Tao Fu, JianHui Wei, Huiming Bao, and Junlin LiangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20205,035 words Report 1480LRed mud, a waste residue of aluminium industry, was used as modified asphalt material to prepare red mud modified asphalt and red mud modified asphalt under freeze-thaw cycles. The matrix asphalt (MA), red mud modified...

• Crystal Structure, Lattice Strain, Morphology, and Electrical Properties of Sn[O.sub.2] Nanoparticles Induced by Low Calcination Temperature.

  Authors:Panya Khaenamkaew, Dhonluck Manop, Chaileok Tanghengjaroen, and Worasit Palakawong Na AyuthayaFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20204,867 words Article 1330LThe electrical properties of tin dioxide (Sn[O.sub.2]) nanoparticles induced by low calcination temperature were systematically investigated for gas sensing applications. The precipitation method was used to prepare...

• Research of Deicing and Melting Snow on Airport Asphalt Pavement by Carbon Fiber Heating Wire.

  Authors:Xin Su, Yong Lai, Yan Liu, Daoxun Ma, and Peng WangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20202,832 words Article 1260LIn the paper, the method of deicing and melting snow by the carbon fiber heating wire (CFHW) embedded in the airport asphalt pavement is proposed to improve the security of airport operation. The field experiment of...

• Electrolytic Manganese Residue-Modified Asphalt Performance Test and Micromechanism Analysis.

  Authors:Tao Fu, Bin Pang, Haoxu Li, Junlin Liang, and Huiming BaoFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20208,172 words Article 1490LThe aim of this paper is to study the feasibility of using an electrolytic manganese residue (EMR) as modified asphalt. In this paper, after grinding the electrolytic manganese residue (EMR) into asphalt, the...

• Thermal Expansion of Triaxially Stressed Mudstone at Elevated Temperatures up to 400[degrees]C.

  Authors:Zi-jun Feng, Meng-meng Qiao, Fu-ke Dong, Dong Yang, and Peng ZhaoFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20205,037 words Article 1340LIn order to study the thermal deformation of the rock that surrounds underground engineering projects with elevated temperatures (e.g., underground coal gasification, coal in situ pyrolysis, in situ oil and gas...

• Load-Bearing Characteristics of Large-Diameter Piles Based on Ultimate Load Tests.

  Authors:Xueying Liu, Xiaoyu Bai, Mingyi Zhang, Yonghong Wang, Songkui Sang, and Nan YanFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20205,460 words Article 1620LAs part of a large converter project in Shandong Province, vertical static load tests and internal force tests were conducted on three large-diameter rock-socketed piles, their load transfer mechanism was clarified, and...

• Application of Artificial Ground Freezing Technology in Modern Urban Underground Engineering.

  Authors:Yi Qi, Jinxun Zhang, Hao Yang, and Yongwei SongFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20204,767 words Article 1460LBased on typical water-rich sandy gravel strata in Beijing, in order to explore the application of the artificial ground freezing method (AGF) in urban large-scale underground engineering, the formation and development...

• Fluidization Analysis of Thickening in the Deep Cone for Cemented Paste Backfill.

  Authors:Haiyong Cheng, Jin Liu, Shunchuan Wu, and Xiaoqiang ZhangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20204,296 words Article 1380LCemented paste backfill (CPB) can effectively eliminate the risk of dam break in goaf and tailings pond which used tailings waste. Deep cone thickener (DCT) is an efficient machine for the system of paste preparation,...

• Multiobjective Optimization of Milling Parameters for Ultrahigh-Strength Steel AF1410 Based on the NSGA-II Method.

  Authors:Jin Xu, Fuwu Yan, Yan Li, Zhenchao Yang, and Long LiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20205,334 words Article 1420LIn this paper, ultrahigh-strength steel AF1410 was milled with the carbide tool, and a total of thirty experiments were performed based on central composite design (CCD) of response surface methodology. The prediction...

• Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response.

  Authors:Abdul Moudood, Anisur Rahman, Andreas Ochsner, Md Mainul Islam, Mohammad Yeakub Ali, and Gaston FrancucciFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20203,902 words Article 1370LThe moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an...

• Deep Learning Technology for Weld Defects Classification Based on Transfer Learning and Activation Features.

  Authors:Chiraz Ajmi, Juan Zapata, Sabra Elferchichi, Abderrahmen Zaafouri, and Kaouther LaabidiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 202010,953 words Article 1360LWeld defects detection using X-ray images is an effective method of nondestructive testing. Conventionally, this work is based on qualified human experts, although it requires their personal intervention for the...

• Effects of Anodization-Assisted Electrodeposition Conditions on the Fabrication of CuO-[Cu.sub.2]O Coatings on Nanoporous Stainless Steel.

  Authors:Hefeng Wang, Jiaojiao Zhang, and Xiaomin JinFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20203,444 words Article 1430LSurface functionalization can be utilized as a useful tool to improve the antibacterial performances of medical devices. Furthermore, some antibacterial agents are coated or impregnated on the surface of 316LSS to...

• Numerical Study on Shear Performance of a New Perfobond Connector with Controllable Stiffness.

  Authors:Yangqing Liu, Yuqing Liu, Haohui Xin, Hao Tian, and Jun WeiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20205,350 words Article 1400LTo improve the shear behavior and design applicability of rubber ring perfobond connectors (RPBLs), a new rubber ring that aims to make the shear stiffness of RPBLs controllable was proposed. Firstly, the conceptual...

• Developing Geopolymer Concrete Properties by Using Nanomaterials and Steel Fibers.

  Authors:E. Rabiaa, R.A.S. Mohamed, W.H. Sofi, and Taher A. TawfikFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20206,221 words Article 1550LThis research investigates the simultaneous impact of two different types of steel fibers, nanometakaolin, and nanosilica on the mechanical properties of geopolymer concrete (GPC) mixes. To achieve this aim, different...

• Bearing Characteristics of Moso Bamboo Micropile-Composite Soil Nailing System in Soft Soil Areas.

  Authors:Zhihe Cheng and Yousheng DengFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20208,249 words Article 1510LBased on the characteristics of moso bamboo including high short-term strength, stable performance, and ability to provide temporary support for shallow foundation pits in soft soil, the stress characteristics and...

• Numerical Simulation of Strength, Deformation, and Failure Characteristics of Rock with Fissure Hole Defect.

  Authors:Shaojie Chen, Zhiguo Xia, and Fan FengFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20207,049 words Article 1650LUsing discrete element software, namely, particle flow code as two-dimensional program (PFC2D), two types of models were established: vertical fissure hole combination and horizontal fissure hole combination with ratios...

• Fatigue Life Prediction of Half-Shaft Using the Strain-Life Method.

  Authors:Xipei Ma, Xintian Liu, Haijie Wang, Jiachi Tong, and Xiaobing YangFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20203,845 words Article 1470LFatigue life prediction is an important part of the reliability and durability analysis of automobile components. Based on Wang and Brown's framework, multiaxial random fatigue damage was adopted to predict the fatigue...

• Reliability Assessment Based on GO Method of Metro Traction System.

  Authors:Qi Gong, Bingzhi Chen, Yonghua Li, and Pengpeng ZhiFrom:Advances in Materials Science and Engineering (Vol. 2020) Peer-Reviewed

  Aug. 31, 20207,020 words Article 1410LIn order to improve the reliability of the metro traction system (MTS), the whole life cycle of metro vehicles can be operated safely and reliably. A reliability assessment method based on the GO method of the MTS is...