CFD modeling of a vehicle exhaust laboratory sampling system: sulfur-driven nucleation and growth in diluting diesel exhaust

Citation metadata

Authors: M. Olin and M. Dal Maso
Date: May 13, 2015
From: Atmospheric Chemistry and Physics(Vol. 15, Issue 9)
Publisher: Copernicus GmbH
Document Type: Brief article
Length: 236 words

Document controls

Main content

Abstract :

A new exhaust aerosol model CFD-TUTEAM (Tampere University of Technology Exhaust Aerosol Model for Computational Fluid Dynamics) was developed. It is based on modal aerosol dynamics modeling with log-normal assumption of particle distributions. The model has an Eulerian sub-model providing detailed spatial information within the computational domain and a computationally less expensive, but spatial-information-lacking, Lagrangian sub-model. Particle formation in a laboratory sampling system that includes a porous tube-type diluter and an aging chamber was modeled with CFD-TUTEAM. The simulation results imply that over 99% of new particles are formed in the aging chamber region because the nucleation rate remains at a high level in the aging chamber due to low dilution ratio and low nucleation exponents. The nucleation exponents for sulfuric acid in sulfuric-acid-water nucleation ranging from 0.25 to 1 appeared to fit best with measurement data, which are the same values as obtained from the slopes of the measured volatile nucleation mode number concentration vs. the measured raw exhaust sulfuric acid concentration. These nucleation exponents are very low compared to the nucleation exponents obtained from the classical nucleation theory of binary sulfuric-acid-water nucleation. The values of nucleation exponent lower than unity suggest that other compounds, such as hydrocarbons, might have a significant role in the nucleation process.

Source Citation

Source Citation   

Gale Document Number: GALE|A481447032